[Rally] TOYOTA SUPRA MK4 – 6PT – FULL CAGE BOLT IN
[Rally] TOYOTA SUPRA MK4 – 6PT – FULL CAGE BOLT IN
Roll Cage (6 point) Bolt-in – Main hoop, double diagonal bracing (through hoop), back stays, lateral bars (front legs), windscreen top cross bar, harness bars through hoop (suit wrap around harness), harness bar through low end of back stays with 4 x eye bolts fitted (suit clip on harness), double door bars, roof reinforcement bars, windscreen pillar support bars, double diagonals through back stays.
Rally Spec – National Level Race meetings, National Tarmac Rally events or Drifting.
NOTE:
All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
Pricing below includes the additional gussets where applicable.
ROLL CAGE FITTING
o Fitting does include welding a lower mounting plate to the chassis (with captive nuts) to attach the main roll over hoop.
o Fitting does not include modifications to the rear inner trim panels and seat cushions (if they’re going back into the car).
DESCRIPTION
Rally Spec - National Level Race meetings, Drifting or Drag Racing (down to 8.0 sec ¼ mile)
Notes:
AGI Bolt-in roll cage kits are painted in a Satin Black (low glare) finish.
Roll cage kits come complete with lower plates and high tensile fasteners.
Roll Cage tubing is 350 MPA CDS Mild Steel. MIG Welded.
When installing the kit yourself, please note that all our bolt-in roll cages are pre-drilled (roll cage connector to corresponding tube) unlike other kits on the market. We also check for accuracy and fitment on our in-house roll cage jig. If you’re comparing our roll cages to that of another manufacturer, please ensure you’re comparing similar products. Some bolt-in kits don’t simply ‘bolt-in’ as suggested and require some modification to install.
Please note that payment in full (for the roll cage kit) is required when ordering.
Credit card payment is preferred.
Note: During the shipping process the item can sometimes get minor scratches as it moves through the shipping process. Scratches can easily be touched up by using a black etch primer before the installation process takes place. Alternatively, you may opt to take it to a local body shop and color matched to your vehicle (at client’s own expense).