[Street] MGB GT – 4PT – BOLT IN - ROLL BAR
[Street] MGB GT – 4PT – BOLT IN - ROLL BAR
Half Cage (4 point) Bolt-in – Main Hoop, diagonal brace (through back stays), backstays and harness bar.
Street Spec – Super Sprints or Track Days
NOTE:
All orders taken after the 1st of April 2018 will have gussets fitted to the junction of all double diagonal members.
Examples of this are the double diagonal brace through the main hoop and double door bars. Basically anywhere there is an ‘X’ diagonal brace.
Pricing below includes the additional gussets where applicable.
DESCRIPTION
Half Cage (4 point) Bolt-in – Main Hoop, diagonal brace (through back stays), backstays and harness bar.
Entry Level specification – Super Sprints or Track Days
Optional:
Harness eyebolts & sleeves (threaded inserts welded into harness bar): $100 for driver’s side or $150 for both driver & passenger.
Optional:
Second welded diagonal brace (x-member) through back stays: $100
Optional
Fitting includes welding lower mounting plates to the chassis (with captive nuts) to fasten the main roll over hoop feet down to and back stay mounts.
Fitting does not include modifications to the rear inner trim panels and seat cushions (if they’re going back into the car).
Note: This Roll cage kit requires main hoop mounts to be welded to the floor/chassis. The main hoop and back stays then fasten down to the welded mount plate. The mounts are included in the kit.